VW: 15-21 Golf GTI, 2015 Golf R MK7 Without DDC - KW Variant 1 Coilover Kit - KW Suspensions

KW SuspensionsSKU: KWS1028000N

Sale price$1,584.00
In Stock



KW Variant 1 ‘INOX-LINE’ Coilover Kit is KW Suspension’s entry level performance coilover kit. The high quality inox-line stainless steel coilover struts, corrosion resistant springs, bump stops and dampers are optimally tuned resulting in a balanced and sporty feel, specific to vehicle application, and designed for long lasting driving pleasure.


Maximum lowering can be achieved with KW Variant 1 ‘INOX-LINE’ coilovers that, within an approved lowering rate, ensure proper functioning suspension and adequate travel when the vehicle is lowered. Ride height continues to be easily adjustable, even after years of use, due to the dirt resistant trapezoid thread and composite adjustment collar.


The pre-configured vehicle specific damper setup and spring rate increase driving pleasure with an optimal balance of comfort, sportiness, practicality and safety. Vehicle body roll is reduced during compression to give the benefit of more genuine and direct handling while driving.


The KW Variant 1 ‘INOX-LINE’ Coilover Kit has been developed and manufactured in-house at KW’s facility in Germany, specifically for the particular vehicle. The V1 coilovers undergo comprehensive stress testing and fine tuning, as do all KW coilovers, at their 7-post Driving Dynamic Test Center and on the Nürburgring.


  • Customized suspension lowering
  • ‘Inox-Line’ stainless steel struts
  • Corrosion resistance springs
  • Bump stops
  • Dirt resistant trapezoidal thread
  • Reduced body roll
  • Pre-configured damping
  • Technical Component Report
  • KW Suspension limited lifetime warranty
 Pictures For Illustrative Purposes Only


    VW Model / Year
    Lowering Rate 
    Golf R
    2015 (4dr; hatchback; awd) Front: 0.4"-1.6"/ Rear: 0.8"-1.8"
    Golf GTI Autobahn

    Front: 0.6"-1.8"/ Rear: 0.8"-2.0"
    Golf GTI S

    Front: 0.6"-1.8"/ Rear: 0.8"-2.0"
    Golf GTI SE
    Front: 0.6"-1.8"/ Rear: 0.8"-2.0"
    Golf GTI Sport
    2017 Front: 0.6"-1.8"/ Rear: 0.8"-2.0"


    • Valving is adjusted by adjustment knob, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.
    • Only for vehicles with a clamp diameter of 54.6mm on the front axle.
    • For vehicles with electronic dampers, make sure they are shut down/disabled. Specific electronic damper shut-downs/disable modules are available from KW.
    • Front height adjustable by threaded shock bodies. 
    • Rear height adjustable by adjustable spring perch. 

    CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Payment & Security

    Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard Shop Pay Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    You may also like

    Recently viewed